29
232001260G(10)
4.1.10 Connecting the Computer
The LaserPro X500 Series can communicate with a computer through a USB Port or LAN
Port connection interface. Regardless of the connection method chosen, you will need to
connect the respective connection cable from the LaserPro X500 Series to your computer.
USB Connectivity:
Connect the included USB Port Cable to the USB Port on the right side of
the LaserPro X500 SERIES.
Ethernet Connectivity:
Connect the Ethernet Cable in accessory to the Ethernet port on
the right-hand side of the laser system. Follow below instruction for Ethernet connectivity
setup.
NOTE
If you have purchased additional Optional Accessories for the LaserPro X500 SERIES,
please refer to chapter VII
for instructions on how to properly setup your optional
accessories. These should be setup prior to working with your LaserPro X500 SERIES.
4.1.10.1 Networking Connectivity Setup
GCC laser engraver is built-in with LAN port to enable multiple laser engravers to be operated by one
PC and multiple PCs to share a single unit of laser engraver. Follow the setup instructions below
using GCC Spirit GLS machine as illustration.
Step 1. Connect LAN cable to the LAN port of GCC laser engravers and turn on machine
Step 2. Navigate the control panel through <F4> Function
<Machine Setting>
<LAN
Setup Wizard>
IP Address.
Step 3. Go to Windows <Control Panel>
<Hardware and Sound>
<Printer>, and right
click on Spirit series printer to check printer properties.
Step 4. Go to <Ports> tab of Spirit series printer properties, and select <Add Port>, and follow
the instruction to enter the TCP/IP information received from laser machine control panel in
step 2.
Summary of Contents for LaserPro X500 III-80Y
