Puma II User manual 5-2
!
Turn off the cutting plotter, and move the tool carriage away from the area needed
to be cleaned.
!
Raise the pinch rollers and move them away from the grid drum for cleaning.
!
Use a bristle brush (a toothbrush is acceptable) to remove dust from the drum
surface. Rotate the drum manually while cleaning. Refer to Figure 5-1
5.3 Cleaning the Pinch Rollers
If the pinch rollers need a thorough cleaning, use a lint-free cloth or cotton swab to
wipe away the accumulated dust from the rubber portion of the pinch rollers. To
prevent the pinch rollers from rotating while cleaning, use finger to hold the pinch
rollers not to rotate.
If needed to remove the embedded or persistent dust, use the lint-free cloth or cotton
swab moistened with rubbing alcohol.
Figure 5-1
Summary of Contents for PII-132S
Page 1: ...Puma II users manual...