![background image](http://html1.mh-extra.com/html/gcreate/gmax-2-pro/gmax-2-pro_unboxing-and-setup-instructions_3886678005.webp)
Slide Down Upper Gantry
1. Slide the upper rails down un l they lay flat
against the lower frame. Make sure the lead
screw slides all the way into the coupler. Turn the
coupler by hand to ensure a solid connec on.
2. In the accessory box, open the bag containing the
M6 bolts, washers and set screws.
3 Screw in the M6 Bolts and washers into the
T-nuts already in the ver cal rail.
(4) Set Screws
(4) M6 Socket Head Bolts
(4) 1/4” Washers
(1) M6 Bolt
(1) 1/4” Washer
Tighten
Bolt
(1) M6 Bolt
(1) 1/4” Washer
Slide into
coupler
Slide un l flat against
the lower frame
If the rubber spacers pop out
they can be easily pressed back
in. These spacers help line up
the T-Nuts with the holes.
Note
Pg 4