DU-LIL-0004-XX Rev A 9/26/19 GCX Corp. Page 2 of 3
3. Insert the USB Charging Cable through the rear cable access of the Mountable Table Enclosure.
4. Before inserting your tablet, ensure the tablet charging port is on the same side as the USB Charging Cable. Lay the
Mountable Tablet Enclosure face up, insert your tablet and connect the USB Charging Cable.
5. Slide the front of the enclosure onto the rear of the enclosure the same way you removed it. The front of the enclosure
only fits in one direction, if it does not slide easily, reverse the orientation. Do
not
force it.
Mounting Tablet Enclosure to VHM-T, Variable Height Tablet Arm
1. Align the Lilitab VESA Adapter with the 75mm VESA on the rear of the Mountable Tablet Enclosure. The cable slot on
Lililtab VESA Adapter can be installed in any orientation.
2. Attach to the VHM-T, Variable Height Tablet Arm using a Philips #2 Screw Driver and (4) M4 x 14mm Pan Head
Machined Screws.
3. Orientation can be in portrait or landscape.
