DU-LIL-0004-XX Rev A 9/26/19 GCX Corp. Page 3 of 3
4. Cable Management: Open the cable plug on the front of the VHM-T, Variable Height Tablet Arm, to route the USB
Charging Cable through the arm.
Mounting Tablet Enclosure on Patient Engagement Tablet Roll Stand, PTE-0001-60
1. Align the Lilitab VESA Adapter with the 75mm VESA on the rear of the Mountable Tablet Enclosure. The cable slot on
the Lilitab VESA Adapter can be installed in any orientation.
2. Next, attach the Ball Joint VESA Mount using a Philips #2 Screw Driver with (4) M4 x 8mm Pan Head Machined
Screws.
3. Orientation can be in portrait or landscape.
Mounting Tablet Enclosure on M-series / VHM-25 Arms / iPad Roll Stand, IPA-0001-60
1. Align the Lilitab VESA Adapter with the 75mm VESA on the rear of the Mountable Tablet Enclosure. The cable slot on
the Lilitab VESA Adapter can be installed in any orientation.
2. Install using Philips #2 Screw Driver with (4) M4 X 10mm Pan Head Machined Screws.
3. Route the cables through the flexible Cable Guide beneath the arm. For further cable management instructions,
reference page 3 of DU-WMM-0001 for M-Series Arms or page 7 of DU-WS-0008-01 for VHM-25 Arms.
P
h
o
to
In
c
lud
e
s
B
a
ll
J
o
int
V
E
S
A
M
o
u
n
t,
fo
r R
e
fe
re
n
c
e
On
ly
