7. APPENDIX
- 160 -
01 Aug 2018
User Manual for LPU-1000 LED Player Unit
7.2.2.2
Setting up the MDA configuration file
Note:
A valid MDA configuration file
must be set
before playback with MDA internal decoding.
Take note of the server IP address, and load the MDA configuration webpage on a PC connected to the
server.
For example, if the server IP address is '192.168.0.139', load the webpage
The MDA configuration web page will be shown as follows:
Figure 147: MDA Configuration Manager
Use the '
Upload MDA configuration
' section to upload MDA configuration files from the PC to the LPU-
1000 LED Player Unit.
Note:
MDA configuration files must be named in the format 'mda-<XXX>.cfg'.
The '
Select MDA configuration
' section can be used to select the active MDA configuration from uploaded
configuration files. In the example below, the sample 'mda-51.cfg' configuration has been set to be used for
playback.
