2. SMS
- 20 -
01 Aug 2018
User Manual for LPU-1000 LED Player Unit
1
[Use startup / shutdown
password]
There are 3 levels of users on the system
- User
,
Technician,
and
Maintenance
. If this option is checked, the system will start up with a
password dialog and the user will have to authenticate themselves as
one of the above 3 users to start using or shut down the system.
2
[Playlist Management
password protected]
If this option is checked, the User level will be denied the ability to edit
or create any playlists. Only Maintenance and Technician level users
will be able to create and edit playlists.
3
[Automatically fix invalid
show playlist]
If this option is checked, the invalid show playlists will be fixed
automatically.
4
[Reset TimeCode at end of clip]
If the
‘
Reset TimeCode at end of clip
’ option is selected, the timecode
will reset to zero [0:0:0:0] whenever a playback ends or stops. The
TimeCode Display
will reset to zero [0:0:0:0] while the
Duration
and
Remaining
time will reset to 00 hr. 00 min. 00 sec. The Slider Bar will
return to its starting point at the extreme left.
If the
‘
Reset TimeCode at end of clip
’ option is not selected, the
system will retain the timecode at the point in which playback ends
or stops. The
Slider Bar
will remain at where the playback ends or
stops.
5
[Skip checking assets during ingest]
With this option checked the Digital Cinema Package assets will not be
checked for their integrity, this option will reduce ingestion time but
decrease the reliability of the ingestion.
6
[Subtitle Overlay]
For more information, please refer to
Section 2.7.1 Subtitle Overlay
7
[Subtitle Delay]
This option provides the ability to delay the on-screen subtitles, the
delay is set in number of frames.
8
[Font Size]
For changing the size of the font on the screen.
9
[ASI Packet]
This option is provided to select the size of the packets (204 or 188
bytes) on the incoming ASI signal.
10
[Date Format]
For changing the displayed format of the date.
11
[Language]
For changing the user interface language.
12
[Change User Password]
For changing t h e User Password. When
[Change User Password]
is
pressed, 3 prompts will appear. The first prompt is for the user to
enter the old password, the second prompt is for the user to enter the
new password, and the third prompt is for the system to verify the new
password.
