2. SMS
User Manual for LPU-1000 LED Player Unit
01 Aug 2018
- 21 -
13
[Change Technician Password]
For changing the Technician Password. When
[Change Technician
Password]
is pressed, 3 prompts will appear. The first prompt is for the
user to enter the old password, the second prompt is for the user to enter
the new password and the third prompt is for the system to verify the
new password.
14
[Change Maintenance Password]
For changing the Maintenance Password. When
[Change Maintenance
Password]
is pressed, 3 prompts will appear. The first prompt is for the
user to enter the old password, the second prompt is for the user to enter
the new password and the third prompt is for the system to verify the new
password.
15
[SNMP Setup]
For accessing the SNMP Configuration Interface.
Please refer to
Section 2.3.5 SNMP Configuration.
16
[Automation]
This will bring up the automation configuration user interface used to
integrate the IMB with external devices.
Please refer to
Section 2.3.6 Automation.
17
[IMB]
After connecting to the IMB the window will display the IMB version
information as well as check the Marriage and Service Door status on the
cinema LED screen. For IMB Marriage, please refer to the LPU-1000
Installation Manual (see Section 8.2)
18
[Use 24-hour time display format]
When this option is selected, time on the SMS interface will be displayed in
24-hour format. If this option is not selected, time on the SMS interface will
be displayed in 12-hour format.
19
[Alternative Inputs]
This will bring up the Alternative Inputs configuration interface. This
interface can be used to configure video output formats for HDMI and SDI
formats.
20
[MoviePlaz Setup]
To setup the MoviePlaz configuration
.
