- 45 -
March 23, 2018
User Manual for SR-1000 Standalone Integrated Media Block™
7. CONFIGURATION
5
[Mount Capacity Threshold
(for data in %)]
Set the mount capacity threshold value for data (in percentage)
NOTE: When Trap is On, a trap will be sent if the mount
capacity threshold value is reached.
6
[Send detailed S.M.A.R.T.
traps]
Enables the sending of SNMP traps when specific hard disk
S.M.A.R.T. attributes change
7.1.1.6 Sensor
1
[CPU Temperature
Threshold]
Set the threshold temperature required for the CPU sensors by
typing in the field or using an on-screen keyboard.
Check
CPU Temperature Threshold
to activate the Trap.
NOTE: When Trap is On, a trap is sent if the CPU temperature
exceeds the maximum threshold temperature.
1
Figure 32:SNMP Configuration - Sensor
