- 7 -
March 23, 2018
User Manual for SR-1000 Standalone Integrated Media Block™
1. INTRODUCTION
1.2 Safety Instructions
1.2.1 General Safety Instructions
•
The SR-1000 is intended for installation a DCI-compliant Digital Cinema Projector.
•
The operational temperature required should be within 0ºC - 40ºC (32ºF - 104ºF). 250 LFM
airflow must always be present over the IMB from right to left (looking from the front of the IMB)
when powered on.
•
The operating humidity should be within 20% to 90%, non-condensing.
•
Before operating the SR-1000, please read this manual thoroughly, and retain it for future
reference.
•
Installation and preliminary adjustments should be performed by qualified GDC Technology
personnel.
•
All warnings on the SR-1000 mentioned in this documentation manual should be adhered to.
•
All instructions for operating and maintaining the SR-1000 must be followed closely.
1.2.2 Electrical Safety
Safety Warning
•
Do not expose the SR-1000 to rain or moisture, to prevent fire or electrical shock hazard.
•
Consult GDC Technical Support for servicing or maintaining the SR-1000.
•
You are cautioned that any change or modification not expressly approved in this manual or
approved in writing by an authorized representative of GDC Technology could void your
warranty and/or authority to operate the SR-1000.
1.2.3 Testing & Certification
•
The SR-1000 has passed multiple Quality Assurance & Quality Control certifications, issued
by
SGS
Labs - the world’s leading inspection, verification, testing and certification company.
•
Refer to Section
9
for detailed test reports
