- 34 -
December 22
nd
, 2022
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK
™
INSTALLATION MANUAL
13. AUTOMATION SETUP
13. AUTOMATION SETUP
The SR-1000 is able to control external devices using its automation interface. This can be used
to automate repetitive tasks for the cinema operator to prevent user error.
13.1. Automation setup for Server GPIO
The SR-1000 GPIO automation device settings can be configured using the steps below:
1. Under the
Automation
tab in the menu, click the
Device
sub-tab.
2. Under the
Device
list on the left, select
‘
IMBGPIO
’
.
3. Enter the device
Name
,
Input Min Pulse width
and
Output Pulse Width
.
The output pulse width must be at least
100ms
. If a different output pulse width is required, the
value can be entered in the
Output Pulse Width
setting. Click the
Save
button to save any
changes made.
Figure 37: Server GPIO settings
