- 37 -
December 22
nd
, 2022
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK
™
INSTALLATION MANUAL
13. AUTOMATION SETUP
13.4. Automation setup for JNIOR devices
The SR-1000 supports the JNIOR Ethernet I/O controller device. Follow the steps below to
configure a JNIOR device in the server automation interface.
1. Under the
Automation
tab in the menu, click the
Device
sub-tab.
2. Under the
Device
list on the left, click on the
Create
button
.
3. Select
‘
JNIOR_IO
’
as the device
Type
. Enter the
Name
of the JNIOR device and click
OK
.
4. Enter the
IP Address
of the JNIOR device.
5. The settings for
Port
,
Login
and
Password
are set to the default values for JUNIOR device,
if left empty.
6. Click
Save
to save the settings.
Figure 40: JNIOR device setting
