- 39 -
December 22
nd
, 2022
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK
™
INSTALLATION MANUAL
13. AUTOMATION SETUP
13.6. Automation setup for Dolby devices
The SR-1000 supports automation for the Dolby sound processors. Follow the steps below to
configure a Dolby device in the server automation interface. For this example, the device refers
to the Dolby CP650 Cinema Processor.
1. Under the
Automation
tab in the menu, click the
Device
sub-tab.
2. Under the
Device
list on the left, click on the
Create
button
.
3. Select
‘
DolbyCP650
’
as the device
Type
. Enter the
Name
of the Dolby CP650 device
and click
OK
.
4. Enter the
IP Address
of the Dolby CP650 device.
5. Click
Save
to save the settings.
Figure 42: Dolby device setting
