September 26, 2016
SX-4000 Standalone
Integrated Media Block™
User Manual
- 165 -
7. APPENDIX
7.2. IMB Synchronized Playback Operation
Two SX-4000 IMBs can work in sync for dual projector playback of content. This can be used for increasing the
brightness of the image by overlaying the output from the projectors on the same screen, for making a video-
wall or any other applications where two systems need to play in sync.
NOTE 1:
The SX-4000 IMBs must be running a software version that supports IMB synchronized playback.
Please check with your regional GDC office for the correct software version to be used.
NOTE 2:
IMB synchronized playback is only enabled with a license from GDC. Please check with your regional
GDC office for a license to enable IMB synchronized playback.
NOTE 3:
Both server systems that make up one sync solution must be the same model.
Two servers will be used for IMB synchronized playback:
The '
master server
' will be used to control playback for the entire IMB sync system
The '
slave server
' will be controlled by the master server to play in sync with the master
1
2
3
4
