2. SMS
September 26, 2016
SX-4000 Standalone
Integrated Media Block™
User Manual
- 71 -
2
A new window for the
Configuration
opens as seen in
Figure 38
. Press
CineCanvas
to open
the
CineCanvas
.
3
Use the
[▲]
[▼]
buttons to adjust the
Network Time out
and
Projector blank time
.
(a) At Network Timeout, indicate how long the IMB will wait for the projector to respond to
accept the subtitles before popping up an error message. Error can occur due to:
•
Incorrect configurations on the IMB and projector. Make sure the IMB and projector are
set on the same LAN network.
•
Loose network cable connection between the IMB and projector.
(b) At
Projector blank time
, indicate how long the projector should be blanked during change
of PCF or format before playback should commence. This is needed because the projector
shows some noise when the PCF or format is changed.
4
Once set, press
[OK]
to apply settings and return to
SMS
Interface.
(a)
(b)