7. APPENDIX
- 170 -
September 26, 2016
SX-4000 Standalone
Integrated Media Block™
User Manual
7.3.2.2 Setting up the MDA configuration file
Note:
A valid MDA configuration file
must be set
before playback with MDA internal
decoding.
Take note of the server IP address, and load the MDA configuration
webpage
http://<server_IP>/cgi-bin/mdaConfig
on a PC connected to the server.
For example, if the server IP address is '192.168.0.139', load the webpage
http://192.168.0.139/cgi-bin/mdaConfig
The MDA configuration web page will be shown as follows:
Figure 149 MDA Configuration Manager
Use the '
Upload MDA configuration
' section to upload MDA configuration files from the
PC to the SX-4000 Immersive Sound Media Server.
Note:
MDA configuration files must be named in the format 'mda-<XXX>.cfg'.
The '
Select MDA configuration
' section can be used to select the active MDA
configuration from uploaded configuration files. In the example below, the sample 'mda-
51.cfg' configuration has been set to be used for playback.
