2. SMS
- 74 -
September 26, 2016
SX-4000 Standalone
Integrated Media Block™
User Manual
2.8. Series 2 DLP CINEMA
®
Projector Setup
There are several points to be noted when setting up the GDC IMB with a Series 2 DLP Cinema
®
projector.
SMS version 10.0 supports Series 2 projectors, the section below details additional steps required for full Series 2
compatibility. If any fields are left blank the default values are assumed. Login and password fields only need to
be entered if the user has changed these parameters on the projector.
2.8.1. Automation Setup
1
On the
Automation
, press
Devices
. This section will describe individual projector setup.
An example Barco setup is seen in
Figure 45
.
Figure 45 Setting the device type.
2
5
1
