User Manual 9050/9050plus
78413010-003 16
The 9050 printer can be connected to your host computer via different available interfaces on two alternative
controllers.
Before connecting the interface cable, make sure that the printer and the host computer
are turned OFF
1. First Controller: this controller provides the following three interfaces
:
:
A bidirectional IEEE1284 parallel interface
A RS-232C serial interface
An USB interface.
2. Second Controller: this controller provides the following two interfaces:
A bidirectional IEEE1284 parallel interface
An Ethernet LAN interface.
The interface connectors are located on the rear of the printer.
Insert the
parallel interface cable
into the parallel connector and fasten it by means of the clips.
Insert the
serial interface cable
into the serial connector and fasten it by means of the two screws (use the screwdriver).
Insert the
USB interface cable
into the USB connector
Insert the
LAN interface cable
into the LAN connector.
