User Manual 9050/9050plus
78413010-003 36
Configuring the Printer
Operator Panel Presentation
The operator panel enables you to perform many of the printer functions including paper path selections,
font selection and the printer setup.
The operator panel consists of:
A 16 character display (Liquid Crystal Display)
Five led indicators
Nine
function
keys
Display Messages
The printer display is used to indicate the printer status or to request an user intervention. When the printer is in
Ready state, the display gives the following information:
when paper is already loaded and the
printer is off line (ON LINE indicator unlit):
when paper is already loaded and the
printer is on line (ON LINE indicator lit):
OFF LINE M1
ON LINE M1
Printer Status
Current Macro
Printer Status
Current Macro
Where:
OFF LINE
Indicates the printer status
ON LINE
M1, M2, ME, M4,
M5, M6, M7, M8
Indicate which of the four (or eight) User Macros is currently used.
The N° depending by the Firmware level installed.
when there is no paper loaded and the printer
is off line (ON LINE indicator unlit):
when there is no paper loaded and the
printer is on line (ON LINE indicator lit):
LOAD FRONT1
ON LINE M1
Current Paper Path
Printer Status
Current Macro
Where:
LOAD FRONT1
Indicates that the currently selected paper path is out of paper.
The messages are displayed only for the available paper paths, according to the
installed devices.
LOAD FRONT2
OFF LINE
Indicates the printer status
ON LINE
M1, M2, ME, M4,
M5, M6, M7, M8
Indicate which of the four (or eight) User Macros is currently used.
The N° depending by the Firmware level installed.
