GDS SP40plus, User Manual

User Manual                                                                                                            

MAN10239-01                                                 

i 

Compuprint Product Information 

Thanks for choosing the 

Compuprint SP40

plus printer. 

Your printer is a reliable working equipment that will be very useful in your daily job. 
Our printers have been designed to be compact and respectful of the work environment. They offer a wide 
range of features and multiple functions that confirm the high technological level reached by Compuprint 
printers. 
To maintain these printing performances unchanged in the long run, Compuprint has developed its own 
specific branded consumables for each printer type (for example: ribbon cartridges for dot matrix printers, 
toner and OPC cartridges for laser printers, bubble ink jet cartridges for inkjet printers) that assure an 
excellent operation with high printing quality level reliability. 
Compuprint recommends to use only its original Compuprint branded consumables with original packaging 
(identified by its holographic label). In this way, a proper use of the printer at quality level stated in the 
product characteristics can be assured. All typical usage problems related to not certified consumables may 
be avoided, such as an overall quality print level degradation and, often, the reduction of the product life due 
to the fact that the proper working conditions for the print heads, OPC cartridge and other printer parts are 
not assured.   
Moreover, Compuprint does not only certify its consumables in terms of working conditions but also carefully 
controls their compliance with the international  standard rules concerning:  
no cancerous  materials; 
no flammability of the plastic materials; 
other standards 
 
Compuprint advises the customers not to use products for which the compliance to this safety rules are not 
warranted. Finally seek your dealer or contact a COMPUPRINT office and be sure that are provided you the 
original Compuprint branded consumables. 

FCC Notes 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one 
or more of the following measures:  

o

  Reorient or relocate the receiving antenna. 

o

  Increase the separation between the equipment and the receiver. 

o

  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected 

o

  Consult the dealer or an experienced radio/TV technician for help. 

A shielded Centronics IEEE1284 compliant bi-directional parallel cable, maximum length 3 meters (10 feet), 
and a shielded RS-232 serial cable, maximum length 15 meters (50 feet), are necessary for this device to 
meet the requirements of a Class B digital device pursuant to part 15 of the FCC rules. 
The above specified cables are readily available as Personal Computer or Peripheral accessories from 
multiple retail outlets. Please consult your dealer for details concerning such cables and also for information 
about FCC rules for digital devices. 
Changes or modifications to the device covered by this manual, which are not expressly approved by the 
party responsible for compliance, could void the user’s authority under the FCC rules to operate the 
equipment.