8
9
②
①
1) Unfold the tripod in the
proper sequence.
2) Pull the arm to the stopped
pos-ition and unfold the
blades.
3) Remove the battery cover.
4) Insert the battery into the
aircraft ,and lock the buckle at
both ends of the battery.
2) Open the limiter and
secure the mobile device
carefully.
3) Use a USB cable to connect
the mobile device to the
remote control.
②
①
Click!
5. Preparing the Gimbal Camera
Before you mount the gimbal camera, turn off the aircraft's power supply.
The gimbal camera model shown in the figure is for illustration only.
Install the gimbal camera:
4. Preparing the Aircraft
Make sure that the tripod, arms, and blades are all in place. Check that the
arms are perpendicular with the corresponding blades (type a blade or
type b blade).
Please ensure that the battery and the body buckle are set in tightly and
seamlessly.
1. Please install the stands on the aircraft.
Click!
