12
13
8. Controlling flight with GDU Mini app
1) Power on the aircraft.
2) Turn on your mobile device‘s Wi-Fi, and connect to GDU-02-A-xxx through
entering the Wi-Fi Password
：
12345678 .
3) Launch the GDU Mini app , then click to start shooting into the flight interface.
4) Tap One-button Take-off and the aircraft will hover at 1.5 m high. Meanwhile
the virtual sticks will show up on the screen, it can control the flight.
GDU Mini
9. GDU Mini App Operation Interface
1) Shot mode: smart shot and classic shot mode.
Smart Shot Mode
Classic Shot Mode
The O
2
aircraft is to be controlled by WIFI directly; For other O
2
series aircrafts,
controlled by App must through USB cable, connecting with the controller.
The default setting of remote control is American mode(including virtual
buttons) . The left stick controls the aircraft’s altitude androtation, while the
right stick controls its forward, backward, left and right movements.
Right Stick
Turn Left
Turn Right
Up
Forward
Backward
Left
Right
Down
Left Stick
2
）
Take off: Move the control sticks in the toe-in directions to unlock the aircraft
and activate the motors; push left stick up slowly to take off. Or press the AUTO
TAKEOFF button on the remote controller.
Landing: push left stick down slowly until the aircraftlands on the ground. Hold a few
seconds until the motors stop. Or press the RTH button on the remote controller.
Unlock the Aircraft
Arming and Starting Motors
①
push left stick up slowly;
Landing :
②
Press take-off button on
Remote controller;
②
Press the RTH button
smoothly;
①
push left stick down slowly
until Aircraft lands on the
ground, and motors stopped;
Take off :
Or
Or
Throttle must be held down for 2-3 seconds when manually landing to shut
down motors.
