19
1. Enable the obstacle
avoidance
mode
.
Click “Start shooting” to enter the flight interface. Enable “Vision-based obstacle avoidance” and
“
Display radar map
” by clicking “Settings” - “Flight setting”. The obstacle
avoidance
mode
will
then
be enabled.
2. After obstacle
avoidance mode is enabled:
1)
The
GDU Mini App will display the distance of front
ward
obstacle
s
.
Obstacles
detected by the
vision system
will be displayed at a range of up to 8m
. The radar map
display
on
the
GDU Mini
APP will turn green, yellow
,
and red according to distance.
2) The aircraft will stop at 1.5m away from
any
obstacle,
and
Forward
commands on the
stick will
be
rendered
invalid. If the obstacle moves towards the aircraft, the aircraft will move backwards
and
maintain
a safe distance of
at least
1.5m from the obstacle.
Follow Me
Operating steps:
1. Click the
smart
function button “
”, and select “Follow Me” in the pop-up interface to
enter Follow me mode.
A target selection
prompt will appear.
2. Select the target by
one of
two means:
A. Double-click: double-click the face or pedestrian
icon on
the screen to detect the target. After
the target is selected,
a
green cursor prompt will appear
on
the screen.
B. Box selection: press
your finger on
the screen and drag
a
box until the selected area fully
covers
the target outline. After the target is selected,
a
green cursor prompt will appear
o
n the
screen.
Once the target is selected, the aircraft will track the object
using
the gimbal camera, and follow
the target
at
a certain distance.
3. Stop Follow Me mode or reselect the target.