23
The process of propeller installation is as follows. First, select the same type of propeller as per
the letter on the motor. With the letter
facing
upwards, press the blade into the clamp. Then press
the clamp into the slot of the motor shaft, and turn the Type
A
propeller leftwards 45 degrees and
the
Type
B
propeller rightwards 45 degrees, until the holes at
the
two ends are aligned with the
stop pins. Finally, tighten the screws.
Screw
Clamp
Blade
④
Motor shaft
slot
The process of propeller disassembly is as follows. First, remove the screws. Then rotate the
clamp of
the
Type
A
propeller rightwards or the clamp of Type
B
propeller leftwards 45 degrees,
then
remove the clamp. Finally, remove the propeller.