33
Right
The default mode is
American
(Mode 1). You can change the operating mode of the remote
controller in
the
Control settings interface of
the
GDU Mini App.
Frequency Matching
Frequency matching of the remote controller and built-in receiver has been
performed
before
delivery, so the user can directly
access
the remote controller. If the aircraft or remote controller is
replaced, frequency matching should be
re
done. It is not necessary to connect the mobile phone to
the remote controller during frequency matching.
Frequency matching steps:
1. With the remote controller OFF, press the Return button and power switch at the same time.
The remote controller will utter
a
prompt sound and “MATCHING...” will appear on the screen.
2. Turn on the power supply of the aircraft.
3. Connect the mobile phone to
the
aircraft. WIFI
network
: GDU-02-A-xxx; password: 12345678.
4. Run
the
GDU Mini App and click “Start shooting” to enter the flight interface.
5. Click “Settings” in the upper right corner. Then click “Remote controller matching” in the
“Control settings” interface.
6. If matching succeeds, “MATCH SUCCESS” will appear on the remote controller
screen
.
7. If matching fails, repeat the above steps.
Flight Mode
Selection
Use the
remote controller
’s
flight mode switch to switch among flight mode
s
. Push the switch to
the left to enable standard mode and
to the
right to enable sport mode.
Standard mode