8
※
The cover is used for protecting the
equipped
gimbal camera. Confirm that the holder cover has been
removed before using the aircraft.
※
It is recommended to install the holder cover to protect the gimbal camera
whenever
the aircraft is not
in use.
2. Pull out
each of the
aircraft arm
s
to the limit mark, and fully unfold the propellers and landing
feet to completely
.
Extend the propeller
Extend the blade
(Pull the arm to the limit mark)
Click!
※
While extending the arm
, Be sure to pull firmly and carefully and do not extend past limit marks.
※
While retracting the arm
, Firmly push the arm back to the proper position, while being sure to guide
props into their grooves, until the clicking sound is heard.
3. Correctly position the remote controller
antennae
.