22
2. Dragging a box around the target. The user should set the flight distance, select
either
video or
photo
mode along with
the control mode, and then click “
Start flight
”. The aircraft will rise while
flying backwards. At the same time, photo
s will be taken
. After shooting, the aircraft will return
and hover in place, as per the
established
settings.
3. If “EXIT” is clicked, the aircraft will exit the Droniemode and hover in
its
current
position
.
Rocket
Operating steps:
1. Click the
smart
function button “
” in the
GDU Mini App
flight interface
. Select
“Rocket” in the pop-up interface to enter the Rocket
mode
.
2. The user should set the flight distance, select video or photo
mode along with
the control mode,
and then click “
Start flight
”. The aircraft will rise vertically, and the target will be shot vertically.
After shooting, the aircraft will return and hover in place, as per the settings.
3. If “EXIT” is clicked, the aircraft will exit Rocket
mode
and hover in
its
current
position
.
Propeller
s
The GDU O
2
system is provided with folding propeller
s
divided into Type
A
and Type
B
,
corresponding to
the
different
rotational
directions of the motor.
Propeller
Type
A
Type
B
Schematic
Diagram
Installation
location
On the
clockwise rotating
motor
shaft
On the
counterclockwise rotating
motor shaft
Propeller Disassembly
The
base
of blade,
the motor,
and
the arm’s
inner surface are marked with
either A
or
B
. The
letters on these three parts must
match during
the installation process.
