28
Press the remote controller for 1
second
in the OFF state, and check its power on the left side of
the screen. If the aircraft is connected to the remote controller, check the power of the aircraft on
the right side of the screen.
Description of Remote controller Screen
Connection of Remote controller and Aircraft
Charging of Remote controller
Only charge
the remote controller in
its
OFF state. Check whether the remote controller is fully
charged according to the
charger’s
indicator
light
color. If the power indicator flashes in red, it
means that the remote controller is being charged. If the power indicator
shows a steady
ON in
green, it means that the remote controller has been fully charged. The charging duration is
generally within 2 h
ours
.
A
fully charged remote controller can be used for about 1.5 h
ours
.
※
Please use designated chargers to charge battery and remote controller. GDU will not be responsible
for
any damages or
fault
s
caused by not using original accessories.
Mobile Phone
Installation
1. Use the appropriate data cable with micro USB side inserted into the slot.