7
• Signals will be blocked by buildings, trees, and other environmental obstructions resulting in
possible GPS positioning failure or control disconnection. Please only use the product in open
spaces.
• Please use the product
only
within
your own
visual range, and
avoid any
obstacles, people, water,
etc.
• Do not use the product in
proximity to
high-voltage communication
s towers
,
in order
to prevent
interference with
remote controller signals.
• Be careful
when using
the product at altitude
s
of 4000m, or as performance is greatly reduced
and aircraft could be dangerous to operate.
• Please
only
use the product in legal
ly permitted
areas.
2. Operating Instructions
• Do not call or answer the phone
while product is in
flight. Pay close attention to the
GDU
Mini App interface to ensure
a safe
flight.
•
After receiving a low power alert signal, p
lease return and land as soon as possible.
• The
aircraft
will be forced to return upon receiving
an emergency
low power
alert
.
Please
c
ontrol the aircraft to
allow it to
land into a safe place.
• After landing, first turn off the
aircraft’s
power supply,
then conduct any
other operations.
• Do not stop the motor
in mid-flight except in case of emergency
, in order to prevent
any
injuries caused by
the
falling aircraft.
• The propeller
s are
dangerous
when
rotating at high speed. Please keep a safe distance
from
the aircraft in order to ensure
your
safety.
3. Maintenance
•
Please replace the battery promptly in the case
the battery exhibits
damage, bulging
,
or leakage.
•
If
the motors produce abnormal sound
s, this
may be caused by bearing wear. Please replace
the motor by contacting Customer Support.
•
Promptly replace
any
deformed or damaged propeller blade
s
.
•
Keep the gimnal camera lens clean.
Only use
the special cleaning kit
to wipe it
.
Product Overview
Aircraft and Remote controller
Preparation
1. Remove the cover from the aircraft.
