5
4
User Manual
User Manual
Camera.Interface
Press “start” to enter camera interface.
APP
Connect.to.App
Start.Up.Interface
Use the USB cable to connect the controller to your mobile device.
Turn on the controller and aircraft and start the App.
Run the App and enter the main menu. When the connection is
normal, the interface will show the start up screen.
Connect.the.
Remote
Connect.the.
Mobile.Device
Power.on.
Remote
Power.on.
Aircraft
Launch.App
①
Display.pan/tilt.angle
Display current pan/tilt angle.
②
Switch.picture.taking./.video.recording
Click to switch between current picture taking/video recording
mode.
③
Picture.taking/video.recording.button
/
Display current functions: picture taking/video recording.
④
Camera.settings
Click to control gimbal pitch
Press the settings
icon in the top right corner. You can choose
between America, China and Japan in the settings interface. Users can
customize the C1 and C2 buttons according to their habits and setting.
The C1/ C2 button is used to configure floodlight switch/low beam/
high beam selector、 set to flash the floodlight.
Camera.Settings
Floodlight.User.Manual
Floodlight.User.Manual
