– 7 –
Control Features
About the controls with temperature settings.
The temperature controls are preset in the factory at
37°F
for the refrigerator
compartment and
0°F
for the freezer compartment. Allow 24 hours for the temperature
to stabilize to the preset recommended settings.
The temperature controls can display both the
SET
temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly
from the
SET
temperature based on usage and operating environment.
Setting either or both controls to
OFF
stops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
For Controls-on-the-Door Models:
Models with External Dispensers:
To change the Refrigerator temperature:
Access By:
Home > Refrigerator
Activate By:
Using the arrows to select the desired
temperature. You must press
ENTER
to set the new
temperature.
To change the Freezer temperature:
Access By:
Home > Freezer
Activate By:
Using the arrows to select the desired
temperature. You must press
ENTER
to set the new
temperature.
Once the desired temperature has been set, the display will
return to the
HOME
screen and show the set temperatures
underneath the actual temperature display for several
seconds. Several adjustments may be required. Each time
you adjust the controls, allow 24 hours for the refrigerator
to reach the temperature you have set.
For Controls Inside the Refrigerator:
Opening the door displays the actual temperature. To
change the temperature, press either the
WARMER
or
COLDER
touch pads until the desired temperature is
displayed.
Once the desired temperature has been set, the
temperature display will return to the actual refrigerator
and freezer temperatures after 5 seconds. Several
adjustments may be required.
Each time you adjust controls, allow 24 hours for the
refrigerator to reach the temperature you have set.
To turn the cooling system off,
tap the
WARMER
pad for
either the refrigerator or the freezer until the display shows
OFF
.
To turn the unit back on,
press the
COLDER
pad for
either the refrigerator or freezer. Then press the
COLDER
pad again and it will go to the preset points of
0°F
for the
freezer and
37°F
for the refrigerator. Setting either or both
controls to
OFF
stops cooling in both the freezer and
refrigerator compartments, but does not shut off electrical
power to the refrigerator.
Models with External Dispensers:
Access By:
Home > Options > Information and Settings >
Cooling System Off
To turn the cooling system back on, press the touch screen
and press the
ON
button.
Activate By:
Pressing
ENTER.
Changing the Temperature
NOTE:
The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
H
OME
H
ELP
L
OCK
Hold for 3 Seconds
to activate Lock
T
URBO
C
OOL
E
NERGY
S
AVER
D
OOR
A
LARM
F
REEZER
F
0
R
EFRIGERATOR
F
37
O
PTIONS
P
RECISE
F
ILL
E
NERGY
S
AVER
ON
(Models with controls inside the refrigerator)
(Models with controls on the door)
Note:
Note:
The following procedure is the only method to turn
the cooling system off.
Access By:
Home > Options > Information and Settings >
Cooling System Off
To turn the cooling system back on, press the touch
screen and press the
ON
button.
Activate By:
Pressing
ENTER
.
