GE
modifications reserved
Page 8/16
GE_UPS_OPM_VCO_XXX_1K0_3K0_XGB_V017
User manual -
VCO Series UPS 1000-3000VA
V017 - GB
2.3.2
FRONT AND REAR PANEL
1.
Operating panel
See section 2.4.1.
2.
Battery door
Covering the DC connector
3.
Input socket
AC mains supply to the UPS.
4.
Input circuit breaker
Protects the UPS from damage caused
by high input currents.
5.
Appliance outlets
To connect the loads to the UPS. Group
5-1 is always on, group 5-2 can be
switched on or off. By switching off
group 2 during a power failure you can
increase the remaining runtime for the
essential equipment connected to
group 1. See 2.4.5.
6.
Output circuit breakers (VCO3000 only)
In case of a severe overload the output breaker may trip. The button will come out, the UPS is disconnected from
the mains and output power is lost. In this situation reduce the load connected to the outlets of the UPS.
Subsequently reset the circuit breaker by pushing the button back in.
7.
Fan(s)
8.
Phone/FAX/Modem protection
The RJ11 jacks can provide protection against surges and spikes on your phone line.
9.
USB port*
10.
RS232 port*
11.
Slot for optional communication card
*
12.
EPO port - Emergency Power Off interface
See 2.3.5 for more information.
* See 2.5 for more information.
Fig. 2.3.2: front and rear panels