GE Multilin
F60 Feeder Protection System
6-9
6 ACTUAL VALUES
6.2 STATUS
6
Accuracy is the estimated maximum time error at present in the RTC, considering the quality information imbedded in the
received time signal. The value 999,999,999 indicates that the magnitude of the estimated error is one second or more, or
that the error cannot be estimated.
PORT 1…3 PTP
STATE
is the present state of the port’s PTP clock. The PTP clock state is:
•
DISABLED
is the port’s function setting is Disabled,
•
NO SIGNAL
if enabled but no signal from an active master has been found and selected,
•
CALIBRATING
if an active master has been selected but lock is not at present established,
•
SYNCH’D (NO PDELAY)
if the port is synchronized, but the peer delay mechanism is non-operational, and
•
SYNCHRONIZED
if synchronized.
PTP-— IRIG-B DELTA
is the time difference, measured in nanoseconds, between the fractional seconds portion of the time
being received via PTP and that being received via IRIG-B. A positive value indicates that PTP time is fast compared to
IRIG-B time.
6.2.15 HI-Z STATUS
PATH: ACTUAL VALUES
STATUS
HIZ STATUS
The current status of high-impedance fault detection element is displayed here. Refer to
Theory of operation
for information
on element status determination. The arc fault detection confidence is also displayed.
6.2.16 DIRECT INPUTS
PATH: ACTUAL VALUES
STATUS
DIRECT INPUTS
HIZ STATUS
HIZ STATUS:
NORMAL
Range: Normal, Coordination Timeout, Armed, Arcing,
Down Conductor
MESSAGE
ARC CONFIDENCE A:100
B:100 C:100 N:100 %
DIRECT INPUTS
AVG MSG RETURN
TIME CH1: 0 ms
MESSAGE
UNRETURNED MSG
COUNT CH1: 0
MESSAGE
CRC FAIL COUNT
CH1: 0
MESSAGE
AVG MSG RETURN
TIME CH2: 0 ms
MESSAGE
UNRETURNED MSG
COUNT CH2: 0
MESSAGE
CRC FAIL COUNT
CH2: 0
MESSAGE
DIRECT INPUT 1:
On
MESSAGE
DIRECT INPUT 2:
On
↓
MESSAGE
DIRECT INPUT 32:
On
Summary of Contents for F60
