manualshive.com logo in svg

GE Interlogix NetworX NX-8, Installation Manual

The GE Interlogix NetworX NX-8 is a top-notch security system designed to safeguard your home or business. With its comprehensive Installation Manual, you can easily set up and customize the system to meet your specific needs. Download the user manual for free from our website and enjoy the peace of mind you deserve.

Share
Download
background image

Page 29

LOCATION 74 - EXPANDER TROUBLE AND EXPANDER TROUBLE RESTORE COMMUNICATOR CODES,
SLOW SPEED FORMATS ONLY (4 segments, numerical data)
Location 74 contains the tens and ones digits for a 4+2 format that will be sent if "Expander Trouble Reporting" is
enabled. Segment 1 contains the tens digit of the "Expander Trouble Reporting". Segment 2 contains the ones digit
of the "Expander Trouble Reporting". Segment 3 contains the tens digit of the "Expander Trouble Restore". Segment
4 contains the ones digit of the "Expander Trouble Restore".

LOCATION 75 - FAIL TO COMMUNICATE COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY
(2 segments, numerical data)
Location 75 contains the tens and ones digits for a 4+2 format that will be sent if the "Fail To Communicate Reporting"
is enabled. Segment 1 contains the tens digit, segment 2 contains the ones digit.

LOCATION 76 - LOG FULL COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments, numerical
data)
Location 76 contains the tens and ones digits for a 4+2 format if the "Log Full Reporting" is enabled. Segment 1
contains the tens digit, segment 2 contains the ones digit.

LOCATION 77 - OPENING COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8 segments, numerical
data)
Location 77 contains the tens digit of a 4+2 format if the "Opening Reporting" is enabled. The ones digit is the ones
digit of the user number that did the opening. If the user is greater than 9, the numbers will begin repeating. If
it is required to report openings and closings for more than 9 users, Contact ID or SIA format must be used. Any
segment left as "0" will follow the Segment 1 selection.

Segment 1 - Opening Code for Partition #1.
Segment 2 - Opening Code for Partition #2.
Segment 3 - Opening Code for Partition #3.
Segment 4 - Opening Code for Partition #4.
Segment 5 - Opening Code for Partition #5.
Segment 6 - Opening Code for Partition #6.
Segment 7 - Opening Code for Partition #7.
Segment 8 - Opening Code for Partition #8.

LOCATION 78 - CLOSING COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8 segments, numerical
data)
Location 78 contains the tens digit of a 4+2 format if the "Closing Reporting" is enabled. The ones digit is the ones
digit of the user number that did the closing. If the user is greater than 9, the numbers will begin repeating. If
it is required to report openings and closings for more than 9 users, Contact ID or SIA format must be used. Any
segment left as "0" will follow the Segment 1 selection.

Segment 1 - Closing Code for Partition #1.
Segment 2 - Closing Code for Partition #2.
Segment 3 - Closing Code for Partition #3.
Segment 4 - Closing Code for Partition #4.
Segment 5 - Closing Code for Partition #5.
Segment 6 - Closing Code for Partition #6.
Segment 7 - Closing Code for Partition #7.
Segment 8 - Closing Code for Partition #8.

LOCATION 79 - AUTOTEST COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments, numerical
data)
Location 79 contains the tens and ones digits for a 4+2 format that will be sent if the "Autotest" or "Manual Test" is
enabled. Segment 1 contains the tens digit segment 2 contains the ones digit.

LOCATION 80 - RECENT CLOSING AND EXIT ERROR COMMUNICATOR CODE, SLOW SPEED FORMATS
ONLY (2 segments, numerical data)
Location 80 contains the tens digit for a 4+2 format that will be sent if "Recent Closing" and/or "Exit Error Reporting" is
enabled. Segment 1 contains the tens digit for the "Recent Closing Reporting". Segment 2 contains the digit for the
"Exit Error Reporting". The ones digit is the ones digit of the user who closed. If the user number is greater
than 9, the numbers will begin repeating (i.e. 9 for user 29). If it is required to report Recent Closings and Exit
Errors for more than 9 users, Contact ID or SIA format must be used.

Summary of Contents for NetworX NX-8






























































Reviews:

No comments

Related manuals for NetworX NX-8

Wheelock MT-12/24 Installation Instructions Manual preview
MT-12/24
Brand: Wheelock Pages: 6
Ampac XP95 Product Manual preview
XP95
Brand: Ampac Pages: 25
Ampac SmartTerminal Installation, Commissioning & Operation preview
SmartTerminal
Brand: Ampac Pages: 22
Silent Alert SW3A-2208-EU Quick Manual preview
SW3A-2208-EU
Brand: Silent Alert Pages: 23
Ziton ASWP-RF Installation Manual preview
ASWP-RF
Brand: Ziton Pages: 2
M-Audio FireWire Solo User Manual preview
FireWire Solo
Brand: M-Audio Pages: 20
Plumis Automist Smartscan Hydra Design, Installation, Operation And Maintenance (Diom) Manual preview
Automist Smartscan Hydra
Brand: Plumis Pages: 116
Cooper Wheelock RSS-24110W Installation Instructions preview
RSS-24110W
Brand: Cooper Wheelock Pages: 4

Brands by name

Popular brands

Load more brands