0150-0193C
48
Calibur DVMR
e
Triplex
Titles Display
Camera titles may be displayed on either monitor. Use this menu
to turn this feature On or Off.
Rotate the
Jog
buttons to navigate and the
Shuttle
to change the values.
Edit Titles
Rotate the
Shuttle
to select the camera whose title you wish to configure, and then press the
Enter
button. The Camera Title Edit menu will appear.
Camera Title Edit
SEQ key selects character bank
‘1’ key inserts blank character
‘2’ key inserts selected character
@ABCDEFGHIJKLMNOPQRSTUVXXYZ[\]^
Camera
Title : Camera 01
1
[CANCEL] [OK]
Camera Title Edit Menu
1.
With the camera title selected, press the
Enter
button. The menu will enter the Edit mode and the
character bank will appear in the center of the menu.
2.
Press the
Sequence
button to select the desired character set.
3.
Rotate the
Shuttle
to navigate the cursor in the camera title.
4.
Rotate the
Jog
to navigate the cursor in the character bank.
5.
Press the
Number 1
button to insert a blank character or press the
Number 2
button to insert the
selected character.
6.
When finished editing the title, press the
Enter
button to exit the edit mode.
7. Save changes and exit the menu:
Select
[OK]
, then press the
Enter
button.
8. Exit the menu without making changes:
Press the
Menu
button, or select
[CANCEL]
, then press
the
Enter
button.
q
Main Menu
→
Camera Setup
→
AGC
Use the Automatic Gain Control (AGC) to adjust the video input
signal level for cameras whose level is outside the normal range.
The default gain setting is 100%.
Rotate the
Jog
to navigate and the
Shuttle
to change the values.
Save changes and exit the menu:
Select
[OK]
, then press the
Enter
button.
Exit the menu without making changes:
Press the
Menu
button,
or select
[CANCEL]
, then press the
Enter
button.
Titles Display
[CANCEL] [OK]
Monitor A:
Monitor B: OFF
ON
Signal Gain Setup
[CANCEL] [OK]
Camera 01
Signal Gain
100%
Summary of Contents for TRIPLEX 0150-0193C
Page 77: ...0150 0193C...
