manualshive.com logo in svg

GE MDS MDS iNET 900, Reference Manual

The GE MDS iNET 900 Reference Manual is the go-to resource for mastering the powerful features and functions of this advanced product. Seamlessly download this comprehensive manual for free from 88.208.23.73:8080, empowering you to maximize your understanding and optimize your experience with the GE MDS iNET 900.

Share
Download
background image

 

05-2806A01, Rev. H

iNET Series Reference Manual

iii

 

TCP vs. UDP..................................................................................................................................61
Serial Encapsulation ......................................................................................................................61
TCP Client vs. TCP Server ............................................................................................................62
UDP Multicast ................................................................................................................................62
PPP................................................................................................................................................63
Data Buffering ................................................................................................................................63
Implementing Configuration Changes............................................................................................63
Serial Configuration Wizard ...........................................................................................................63

2.6.2   Serial Data Port Configuration Menu ........................................................................................63
2.6.3   Configuring for UDP Mode  .......................................................................................................64
2.6.4   Configuring for TCP Mode ........................................................................................................68
2.6.5   Configuring for PPP Mode ........................................................................................................70
2.6.6   IP-to-Serial Application Example  ..............................................................................................71
2.6.7   Point-to-Multipoint IP-to-Serial Application Example  ................................................................72
2.6.8   Point-to-Point Serial-to-Serial Application Example  .................................................................74
2.6.9   Combined Serial and IP Application Example  ..........................................................................75

Operation and Data Flow ...............................................................................................................75

2.6.10   Virtual LAN in iNET-II and iNET ..............................................................................................77

Configuring for Operation with VLAN.............................................................................................78

 

2.7   CYBER SECURITY CONFIGURATION ............................................................................. 78

 

2.7.1   Device Security  ........................................................................................................................79
2.7.2   Wireless Security ......................................................................................................................80

Local Authentication Approved Remotes/Access Points List Submenu......................................81

2.7.3   RADIUS Configuration  .............................................................................................................82

Operation of Device Authentication................................................................................................83
Operation of User Authentication ...................................................................................................83

2.7.4   RADIUS Configuration  .............................................................................................................84
2.7.5   Certificate Management (Remote transceivers only)  ...............................................................84

 

2.8   PERFORMANCE VERIFICATION ...................................................................................... 85

 

2.8.1   RSSI by Zone Menu (Remotes Only) .......................................................................................87
2.8.2   Event Log Menu  .......................................................................................................................88

Time and Date................................................................................................................................88
View Current Alarms ......................................................................................................................90
View Event Log ..............................................................................................................................91

2.8.3   Packet Menu  ............................................................................................................................91

Wireless Packet Statistics..............................................................................................................91
Ethernet Packet Statistics ..............................................................................................................92
Packets Received by Zone ............................................................................................................93

2.8.4   Wireless Network Status (Remotes Only)  ................................................................................94

The Transceiver s Association Process .........................................................................................94
The Wireless Network Status Screen (Remotes Only) ..................................................................95

2.8.5   Remote Listing Menu (Access Points Only)   ............................................................................96
2.8.6   Endpoint Listing Menu (Access Points Only)  ...........................................................................97
2.8.7   Remote Performance Listing Menu 
(Access Points Only)   ..........................................................................................................................98

Summary of Contents for MDS iNET 900































































































































































































Reviews:

No comments

Related manuals for MDS iNET 900

ABB ACS355 series Application Manual preview
ACS355 series
Brand: ABB Pages: 30
Magnadyne M11 Manual preview
M11
Brand: Magnadyne Pages: 36
FAAC RP1 Quick Start Manual preview
RP1
Brand: FAAC Pages: 2
Halemeier S-Mitter basic MultiWhite2 Manual preview
S-Mitter basic MultiWhite2
Brand: Halemeier Pages: 12
JENCO 3331 Operation Manual preview
3331
Brand: JENCO Pages: 29
jablotron AC-116 Manual preview
AC-116
Brand: jablotron Pages: 3
XIEGU X5105 Manual preview
X5105
Brand: XIEGU Pages: 20
XIEGU X108G Operating Manual preview
X108G
Brand: XIEGU Pages: 17
Yaesu FT-911 Preliminary Service Manual preview
FT-911
Brand: Yaesu Pages: 40
Yaesu FT-212RH Technical Supplement preview
FT-212RH
Brand: Yaesu Pages: 35
Yaesu FT-757GX II Manual preview
FT-757GX II
Brand: Yaesu Pages: 39
Yaesu FTM-400XDR Quick Start Manual preview
FTM-400XDR
Brand: Yaesu Pages: 2
Yaesu FT-991A Instruction Manual preview
FT-991A
Brand: Yaesu Pages: 15
Yamaha RX-V485 Owner'S Manual preview
RX-V485
Brand: Yamaha Pages: 155
Vaisala Humicap HMD60Y Operating Manual preview
Humicap HMD60Y
Brand: Vaisala Pages: 20
AMG AMG4744ER-SF Instruction Manual preview
AMG4744ER-SF
Brand: AMG Pages: 8
Uniden Bearcat BC 210XLT Operating Instructions Manual preview
Bearcat BC 210XLT
Brand: Uniden Pages: 10
GAMA Electronics RF24V1PR-ASL-NIS Instruction Manual preview
RF24V1PR-ASL-NIS
Brand: GAMA Electronics Pages: 4

Brands by name

Popular brands

Load more brands