05-2806A01, Rev. H
iNET Series Reference Manual
55
Invisible place holder
Figure 2-26. Channel Config Submenu
Key to channel indicators:
n
(no) = Radio channel is not used
y
(yes) = Radio channel is used
NA
(not available) = Radio channel is not available
•
Clear All
—This command clears all entries in the Channel
Config Menu, resetting the available channels to “no usage.”
Channels that are not available for use will appear with a
notation of or
NA
. These channels are not available because
of pre-existing conditions, and are not user-configurable.
•
Enter Channels
—This allows selection of the channels used
for frequency hopping operation.
The selection of particular
channels will result in an indication of
y
. Be aware that these
channels do not become active until the
Commit Changes
selection is invoked.
•
Commit Changes
—This re-boots the radio and loads the active
channels into the frequency list for frequency hopping oper-
ation.
2.5.3 Skip Zones Menu
•
Skip Zones
(Does not apply to iNET-II. Editable at AP Only.)
—This
selection brings up a submenu (Figure 2-27) that displays the
current utilization of zones. Each zone consists of eight RF
channels. In some instances there may be a part of the spectrum
used by another system, that results in “continuous” or “persis-
tent” interference to your system. To alleviate this form of inter-
ference, the transceiver may be programmed to “block out”
affected portions of the spectrum using the Skip Zones Menu.
Summary of Contents for MDS iNET-II 900
