05-4446A01, Rev. E
Mercury Reference Manual
81
•
Buffer Size
—Maximum amount of characters that the Remote
end buffers locally before transmitting data through the serial
port. [
1—255; 255
]
•
Inter-Packet Delay
—Amount of time that signal the end of a
message, measured in tenths of a second. [
default = 1 (that is,
1/10th of a second)
]
•
Commit Changes and Exit Wizard
—Save and execute changes
made on this screen (shown only after changes have been
entered).
Configuring for TCP
Mode
Invisible place holder
Figure 3-45. TCP Client Menu (Remote)
•
Status
—Enable/Disable the serial data port.
•
Mode
—TCP Client. This is the type of IP port offered by the
transceiver’s serial device server. [
TCP, UDP; TCP
]
•
TX IP Address
—The IP address to be used as a destination for
data received through the serial port.
[
Any legal IP address; 0.0.0.0
]
•
TX IP Port
—The destination IP port for data packets received
through the serial port on the transceiver.
[
Any valid IP port; 30010
]
•
TCP Keepalive
—Amount of time (in seconds) that the trans-
ceiver waits for data before terminating the TCP session.
[
0—600; 600
]
•
Baud Rate
—Data rate (payload) for the
COM
port, in
bits-per-second. [
1,200—115,200; 19200
]
•
Byte Format
—Interface signaling parameters. Data bits, parity
and stop bits.
[
7N1, 7E1, 7O1, 8N1, 8E1, 8O1, 8N1, 7N2, 7E2, 7O2, 8N2, 8E2, 8O2;
8N1
]
•
Buffer Size
—Maximum amount of characters that the Remote
end buffers locally before transmitting data through the serial
port. [
1—255; 255
]
Summary of Contents for Mercury 3650
