NX-592E-GSM Wireless Gateway
Installation Manual
12
Specifications
Troubleshooting
This section provides information to help you diagnose and solve various problems that may arise while
configuring or using your GE Security product.
• The bus LED is not flashing.
Turn off panel AC power and verify that all wiring is correct.
Note:
All buffered messages may be received from the two-way paging network upon restoring power to the module.
• The module status LEDs do not immediately turn on after initial power-up.
You may have to wait five to eight minutes for the module to communicate with Alarm.com services.
• The touchpads/sirens are beeping even though the system is not armed.
Press
*
,
2
to display the trouble condition. Refer to your touchpad documentation for details.
Compatibility
NetworX panels
Power requirements
9.5 to 15 VDC, 12 V nominal, 65 mA (continuous), 1600 mA (instantaneous peak),
maximum from panel or auxiliary power supply
Cellular network
Quad Band GSM/GPRS
Power / data bus
One 3-wire NetworX power/communication data bus
Indicators
One module/panel communication status LED. Four wireless communication status
LEDs
Operating temperature
32 to 120°F (0 to 49°C)
Storage temperature
-30 to 140°F (-34 to 60°C)
Humidity
90% relative humidity, noncondensing
Case color
Belgian gray
Case materials
High impact, ABS plastic
Dimensions (H x W x D)
5.25 x 4.125 x 1.0 in. (13.3 x 10.5 x 2.5 cm)
Installation
Wall mount
