13
Remote does not operate your device.
• Press the device button of the device you
want to control.
• Program the remote with a new code.
• Install new batteries. (You might have to
reprogram your remote after installing new
batteries.)
• Remote may not be compatible with your device.
Remote does not operate some features of
your device.
• Sometimes a particular code might operate some
features but not all. Try programing remote with a
new code.
• Remote may not be able to operate all features of
your device or button names might be different
than your device.
Red Indicator blinks and stays on after you
program a product code.
• Remote did not accept the code.
• Try to program the code again or try a
different code.
Remote Code is not available for a combo device
(e.g. TV/VCR)
• See section for controlling combo devices.
Remote buttons are not operating properly
• Check to ensure the remote is not in shift mode.
Press and release the
SETUP/SHIFT button and
see if the remote buttons operate properly. If this
does not help, press and release the
SHIFT/SETUP
button again to exit the shift mode.
For additional troubleshooting information please
visit www.jascoproducts.com
Troubleshooting