Tr
oubleshooting T
ips
Installation Instr
uctions
Customer Ser
vice
Operating Instr
uctions
Safety Infor
mation
For many foods, especially roasts and poultry, internal food temperature is
the best test for doneness. The temperature probe takes the guesswork out
of roasting by cooking foods to the exact doneness you want.
How to set the oven for roasting when
using the probe.
Insert the probe into the meat.
Plug the probe into the outlet on the oven wall.
Make sure it’s pushed all the way in. Close the
oven door.
Press the
PROBE
pad.
The display will flash
PROBE
and the oven control will signal
if the probe is inserted into the outlet, but the oven is not
programmed for the probe.
Press the
+
or
–
pad until the desired internal probe
temperature is displayed.
Press the
BAKE
pad.
Press the
+
or
–
pad. The last oven set temperature
appears in the display. Continue pressing until the
desired oven temperature is displayed.
When the oven starts to heat, the words
BAKE ON
and
the roasting temperature you set will be in the display.
After a few seconds, the words
LO PROBE
will replace
the roasting temperature in the display.
After the internal temperature of the meat reaches
100°F., the changing internal temperature will be
shown in the display.
When the internal temperature of the meat reaches
the number you have set, the probe and the oven
turn off and the oven control signals. To stop the
signal, press the
CLEAR/OFF
pad. Use hot pads to
remove the probe from the food. Do not use tongs
to pull on it—they might damage it.
To change the oven temperature during the Roast
cycle, press the
BAKE
pad and then the
+
or
–
pad to get
the new temperature.
■
If the probe is removed from the food before the final
temperature is reached, a tone will sound and the display
will flash until the probe is removed from the oven.
■
You can use the timer even though you cannot use
timed oven operations.
7
6
5
4
3
2
1
25
