6
Operating Instructions
Safety Instructions
Consumer S
uppor
t
Tr
oubleshooting Tips
About the dishwasher control panel.
You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance may vary from your model.
Control Settings
Status Indicator Lights
(Indicators vary by models)
The Status display tells you what is happening while the dishwasher is in operation and may flash,
indicating a malfunction. The lights will come
ON
indicating the sequence of the dishwasher operation.
LOW DETERGENT
Displayed when the SmartDispense
TM
needs to be refilled with liquid or gel automatic
dishwasher detergent.
NOTE:
If you are not using SmartDispense
TM
and you want to turn the
LOW DETERGENT
LED light off, press the
ADDED HEAT
pad 5 times within 3 seconds. You will hear 3
beeps; then the light will go off. You can turn the light back on by pressing the
ADDED
HEAT
pad 5 times within 3 seconds.
SENSING
Displayed while the Clean Sensor
TM
is measuring the amount of soil and temperature
of water. The dishwasher will adjust the selected cycle to achieve optimal performance.
SANITIZED
Displayed when cycle has met sanitization conditions.
CLEAN
Displayed when a wash cycle is complete.
Wash Programs (Selections)
With the dishwasher door closed and latched, press the pad for the desired wash cycle.
NOTE:
All cycle times and water usage information contained in the following section are approximate
values. Actual results will depend on several factors, including but not limited to inlet temperature,
household water pressure and amount of soil in the wash water.
The light above or next to the selected pad will be
ON
to indicate which
WASH CYCLE
has been selected.
2
1
1
2
3
4
1
5