11
OPERATION
Auto shut-off function
•
If the iron is not moved for a certain period of time, it will shut off automatically.
•
After shut off, the iron will cool and the fabric setting display
(7) and color-changing
indicator
(13) will flash slowly in the corresponding color. The buzzer will beep six
times.
•
Tilt the iron down and back to restart the iron in the previous setting.
•
The iron is equipped with a motion sensor. If the iron keeps idle for a certain amount
of time, the buzzer will beep six times to warn you of a potential danger:
position
illustration
Time
beeps
On soleplate
30 seconds
6x
On the side
30 seconds
6x
On the heel
15 minutes
6x
•
Press the fabric setting button
(7) to restart the iron in the previous setting.
•
Memory settings are lost after turning the iron off or disconnecting from the wall
outlet.
Turning the iron off and emptying the water reservoir
•
Press the fabric setting button
(7), until
is displayed. disconnect the iron from
the wall outlet.
•
Turn the function knob
(4) left to the dry ironing position
(ill.
g
).
•
disconnect the iron from the wall outlet.
•
Wait until the iron has cooled completely.
•
Place the iron on its soleplate
(14) on a flat, dry and level surface. Press the function
knob
(4) to open the fill inlet cover (2)
(ill.
a
)
.
•
Hold the iron upside down over a sink to empty the water reservoir
(12).
•
Store the iron on its heel
(10) in a safe place
(ill.
d
)
.
Iron-169233-05 (GB).indd 11
1/11/10 9:59 AM
