14
V
ERIFICACIÓN
DEL
SISTEMA
Los siguientes procedimientos deben ser usados para probar la
configuración del sistema e identificar posibles errores de conección de
líneas. El teléfono debe ser conectado a un contacto de corriente AC, las
líneas 1 y 2 deben ser conectadas al contacto marcado “LINE 1,2,” y el
teléfono debe estar programado con un número de dirección de estación.
O
TRAS
ESTACIONES
1. Oprima “LINE 1.”
2. Vea todas las otras estaciones. Si todas indican que la línea 1 está
siendo usada, la conección es correcta.
U
1. Oprima el botón de interfono (“INTERCOM”). El visor muestra “INT”- y
el indicador de interfono se enciende.
2. Inscriba una dirección de estación para verificar, usando el teclado. El
visor indicará a cuál estación usted ha entrado. Si la estación a la que
usted ha entrado está conectada al sistema, un sonido localizador será
escuchado en la estación a la que usted está llamando y el indicador del
interfono (“INTERCOM”) parpadeará en rojo. Si la estación no está
conectada al sistema, usted escuchará un tono de error, y el interfono
será cancelado.
S
U
ESTACIÓN
1. Oprima “REVIEW.”
2. Oprima el botón de interfono (“INTERCOM”). El visor leerá “Addr-.” Con
la dirección de la estación de dos dígitos (01-16).
NOTA :
Para cambiar la dirección de la estación, vea la sección “Para cambiar
la dirección de una estación.”