12
Volume/Mute Control and Punch-Through
This remote lets you select which device Mode controls your
Volume/Mute buttons. The remote is initially set for all device
Modes to use their own Volume/Mute control if present. If the
programmed code has no Volume/Mute operation of its own then
those buttons will punch-through control to the
TV
Mode device
without needing to change to
TV
Mode.
Any Mode chosen for Volume/Mute control MUST have its own
Volume/Mute function or the Volume/Mute buttons will do
nothing.
Setting ALL Volume/Mute Control to any one Mode
This routine can set all Modes to “punch-through” to any one
chosen Mode for Volume/Mute button control without the needing
to change to that Mode.
1. Press and hold the
SETUP
button until the red indicator
turns on, then release the button.
2. Press and hold the
MUTE
button until the red indicator
blinks off, then release the button.
3. Press and release the desired Mode button (
TV
,
VCR
,
etc.) for Volume/Mute control, the red indicator blinks
then stays on.
4. Press and release the
MUTE
button and the red
indicator turns off. The red indicator will blink rapidly
for three seconds if the Mode you have selected has no
Volume/Mute control.
All other Modes will now punch-through to your chosen Mode for
Volume/Mute control.
Using Your Remote, cont.
