GE 24116 - 4 - Device Universal Remote, Instruction Manual

  Troubleshooting

Remote does not operate your product.

•.. Press.the.mode.button.of.the.product.you.want.to.

control.

•.. Program.the.remote.with.a.new.code.
•.. Install.new.batteries..(You.might.have.to.

reprogram.your.remote.after.installing.new.
batteries.)

•.. Remote.may.not.be.compatible.with.your.product.

Remote does not operate some features of your 

product.

•.. Program.remote.with.a.new.code.
•.. Remote.may.not.be.able.to.operate.all.features.of.

your.product.or.button.names.might.be.different.
than.your.product.

Red Indicator blinks after you program a product 

code.

•.. Remote.did.not.accept.the.code.
•.. Try.to.program.the.code.again.or.try.a.different.

code.

Lost Your Codes?

Enclosed.with.this.remote.is.a.sticker.on.which.
you.should.write.the.codes.for.each.device.you.
programmed..Apply.the.sticker.to.the.back.of.
the.remote.or.somewhere.convenient.for.future.
reference.

Also.on.the.sticker.is.our.website.address.which,.
should.you.lose.your.codes.or.programming.
instructions,.you.can.find.available.on.our.website:
www.jascoproducts.com

13