background image

10

Programming Combo Device Codes

Some.Combo.devices.(e.g.,.TV/VCR,.TV/DVD,.DVD/
DVR,.etc.).will.require.you.to.set.up.two.different.Mode.
buttons.to.control.both.parts.of.the.Combo.device..
For.example,.if.you.have.a.TV/DVD.Combo,.you.might.
need.to.set.up.one.code.under.the.

TV 

button.to.

control.the.TV.part.AND.a.separate.code.(under.any.
other.Mode.button).to.control.the.DVD.part.

Controlling Combo Devices

Some.Combo.devices.(e.g.,.TV/VCR,.TV/DVD,.DVD/
DVR,.etc.).have.separate.buttons.on.the.original.
remote.to.select.the.part.of.the.Combo.device.to.
be.controlled..For.example,.if.your.Combo.device.
is.a.DVD/DVR.then.its.original.remote.might.have.
separate.DVD.and.DVR.buttons.for.selection.of.the.
Combo.part.you.would.control..The.equivalent.button.
functions.can.be.found.on.your.new.remote.by.using.
the.device.Mode.and.

SETUP 

buttons...

Referring.to.“Code.Search”.on.page.8,.setup.a.device.
Mode.(e.g.,.

DVD

).with.the.correct.code.for.your.

Combo.device..Assuming.the.DVD/DVR.Combo.device.
is.the.example.and.its.code.is.programmed.under.

DVD 

Mode,.press.and.hold.the.

DVD

.Mode.button.

for.more.than.one.second.to.send.the.DVD.button.
command..To.send.the.DVR.button.command,.quickly.
press.and.release.the.

SETUP 

button.followed.by.

pressing.and.releasing.the.

DVD

.Mode.button..This.

method.can.be.applied.similarly.to.all.Combo.devices.
(e.g.,.TV/VCR,.TV/DVD,.DVD/DVR,.etc.).and.is.available.
for.all.Modes..Note.this.feature.is.not.supported.by.all.
codes..

Controlling Devices Requiring Separate Power On 

and Off Buttons

Some.devices.(e.g.,.certain.RCA.TVs).require.separate.
Power.On.and.Power.Off.buttons.to.turn.the.device.
on.and.off..The.equivalent.button.functions.can.be.
found.on.your.new.remote.by.using.the.device.Mode.
and.

ON-OFF 

buttons..Referring.to.“Code.Search”.on.

page.8,.setup.a.device.Mode.(e.g.,.

TV

).with.the.correct.

code.for.your.device..

Assuming.a.TV.device.is.the.example.and.its.code.
is.programmed.under.

TV

.Mode,.to.turn.your.TV.on,.

press.and.hold.the.

TV

.Mode.button.for.more.than.one.

second.to.transmit.the.Power.On.button.command..

  Setup

Summary of Contents for 24116

















Reviews: