4
Installation:
1. Attach the coax cable from the antenna to
the in-line amplifier input labeled “ANT IN”
2. Connect the coax cable from the in-line
amplifier labeled “TO TV” to the back
of the TV
3. Connect the DC plug from the Power
Adapter into the in-line amplifier
4. Plug the Power Adapter into an AC outlet
5. Turn on your TV
6. Scan for your local TV channels following
the instructions found in your
TV’s users manual
Helpful Tip 1:
To ensure you receive the maximum number
of channels you may want to experiment re-
positioning the antenna and re-scanning for
channels. You may want to mount your antenna
