background image

9

8

Using Your  Remote

Code Identification

The Code Identification Feature allows you to
identify the 

four

 digit library code stored under your

device button. For example, if you want to find out
what

 four

 digit code is stored under your TV device

button, follow the six steps below:

1. Press and hold the 

SETUP 

button until

the red indicator stays on. Release the

SETUP 

button.

2. Press and release the desired device

button (

TV

VCR

, etc.). The red

indicator blinks, then stays lit.

3. Press and release the 

SETUP 

button.

The red indicator blinks once and
remains lit.

4. To find the first digit for

the code stored under
the device button
pressed in step 2,
press each numeric
button from 

0-9

 in

turn. The number that
causes the indicator
light to blink is the
first digit in your code.

5. To find the second digit, repeat step 4.

6. Repeat step 4

 

to find the third

 and fourth 

 digit. 

This 

time the red indicator turns off and stays off.

Code Search

If your device does not respond after you have tried
all the codes for your brand, or if your brand is not
listed, try searching for your code by following these
steps.

1. Manually turn on the device (

TV

VCR

, etc.) to be

controlled.

2. Press and hold the 

SETUP 

button until

the red indicator stays on, then
release the 

SETUP 

button.

3. Press and quickly release the desired

device button (

TV

VCR

, etc.). The red

indicator blinks off once.

4. Press the 

ON-OFF

 button repeatedly

(up to 300 times) until the device to
be controlled turns off. The red
indicator blinks off with each button
press.

Most users will store VCR codes under the 

VCR 

button,

Cable codes under 

CABLE

, etc. If (for example) you

want to store a VCR code under 

DVD/AUX

, first follow

the procedure for Direct Code Entry (previous page)
and press 

DVD/AUX 

in step 2 of Direct Code Entry, then

enter ANY VCR code in step 3 of Direct Code Entry.
Then follow the steps above for Code Search.

Note

:  Code Search starts from the currently stored

four 

digit number under that mode. Sometimes the

first code that “works” with your device may only allow
limited functionality (e.g. the MENU button might not
work). There may be a code that performs more
functions. Continue the code search process until the
best code is found.

5. Press and release 

ENTER 

to install the

code.

Summary of Contents for 24930










Reviews: