9
Retrieving Codes
If you need to find the three-digit code
for your TV, VCR, DBS Receiver, or
Cable Box after your device is set-up
using Code Search, use this procedure.
1. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
2. Press and release the
device button for the
device’s code you are
retrieving . The
INDICATOR LIGHT
will blink once then
remain lit.
3. Press and release
SETUP. The
INDICATOR LIGHT
will turn off.
4. Starting with 0 on the
keypad, press the
number buttons in
order (0-9) until the
INDICATOR LIGHT
blinks.
5. The number which
causes the INDICATOR
LIGHT to blink is the
first digit of your code.
6. Repeat step 4 until you
have retrieved all three
numbers in the code.
